Reversed Corvair Steering Gear Box
Replace that sloppy, worn out steering box with this brand new Reversed Corvair steering box, for traditional (parallel) style steering, These boxes are constructed of modern high strength steel and needle bearings to ensure durability that original boxes just can't offer, Output shaft offers 36 splines for the pitman arm and is able to be clocked for your application, Input shaft has 5/8-36 splines and accepts common u-joints and couplers for convenience, Nice black painted finish helps with corrosion resistance. Reversed Corvair Steering Gear Box. If you have tried to find a good used Corvair steering box, you know that the chances of finding a good one are slim to none. These brand new Corvair steering boxes have already been reversed.
Designed for use on traditional steering cars and T-buckets, these boxes are constructed of modern high strength steel and needle bearings to ensure durability, which original boxes just can't offer. By everclr190 on December 08, 2020. This was a easy install with minimal modification on my 31 chevy coach. Smooth operation with this box compared to original. Yes, I recommend this product. It appears that it will do the job! By Rusted Nut Garage on October 09, 2020. Installing this in a custom frame for a 27 Chem Truck. Due to the odd angle of the mounting holes a special bucket had to be fabricated. Spline on input shaft would not fit until shaft was reworked. It was difficult to remove all the lash out of the box. Mounting plate comes off at an odd angle. Poor quality workmanship on this unit. Splines needed to be reworked. No, I would not recommend this product. By Al on September 09, 2020. Very pleased can't Waite to hook all together yes. I will use this same box in my next T. By Tiny on May 22, 2020. It's in a car that isn't running yet. It does however seem to do exactly what it's supposed. By Marvin on December 09, 2018. Related Items / Suggested Parts. Flaming River FR1541 Reversed Corvair Steering Box. Sweet U-Joint, 5/8"-36 Spline to 3/4" Round Weld-On. Sweet Mfg Steering U-Joint, 5/8-36 Spline 3/4 DD, Vega/Corvair/GM Rack. Double U-Joint, 5/8-36 Spline 3/4 Round, Vega/Corvair/GM. Double U-Joint, 5/8 36-Spline to 3/4 DD, Vega/Corvair/GM. Sweet Mfg Chrome U-Joint, 5/8-36 Spline to 3/4 DD, Vega, Corvair, GM. Speedway Zinc Corvair Pitman Arm, 7 Inch End To End. Weld-On Corvair Steering Box Mount, 2 Inch Tall. Weld-On Corvair Steering Box Mount, 4 Inch Tall. Speedway Motors is America's Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 73 years.