DIY Swing Motor Automatic Wobbler Machine Reciprocating Gear Box Motor 8-470Rpm
DIY Swing Motor Automatic Wobbler Machine Reciprocating Gear Box Motor 8-470Rpm. High quality: All metal gearboxes, sturdy and durable, effectively protect the engine body of the turbo auger gear to improve the lifespan. Usage: Banking equipment, safe, paper feeder, intelligent gas meter, tissue machine, automotive accessories, display equipment, analysis device, electronic game machine, remote control curtains, locks, document shredders, photocopiers and safes. The components for the linear movement consist of a steel shaft with rolling linear bearings. The surface of the shaft must be lubricated regularly, depending on time and frequency of use. Make sure the heat of the steel shaft does not exceed 90 degrees. Usage: boat, household appliance, fan, car, electric bicycle.
Angle: 35 degrees, 60 degrees, 90 degrees (selectable). Speed (RPM): 1, 5, 3, 5, 6, 10, 14, 28, 30, 40 rpm. Voltage (V): 12 V / 24 V. There are several speed options without load. 12V: 8 12 16 20 27 35 60 70 110 160 180 200 260 350 470 rpm (without load).
24 V: 8 10 13 20 27 36 55 60 70 80 120 160 220 250 280 470 rpm (without load). Angle: 35 degrees, 60 degrees, 90 degrees. 1 x Automatic Wobbler Machine + 1 x Angle Adjusted Tool. Please leave us a message with which angle you need! If there's no message, we'll send the 90 degree model. (You can also change the angle yourself). (1)Confirm the Voltage, Torque, Structure, Work rule. (2)Structure: Right Angle Output, Straight Output, Go and Back, Rotation Work, Line Work. Work Rule: How long work in a period.(3)Torque: Constantly Working Torque should not exceed 75% of the motor's Rated Torque. Instantly Working Torque should not exceed motor's Rated Torque. (4)Motor under loading, Measure Current should not exceed motor's Rated Current. Necessary, you can install Overcurrent Protection Device.
Why don't motor running? Your motor if is low speed motor, extra low speed motor should observe carefully. Connection if is correct, and other electric parts if is fine. (1)Don't store or operate in high temperature or damp environment, and avoid gas environment. (2)The motor's shaft axial direction and radial direction bearing stress should not exceed it ability.
(3)When install gears/sprockets/pulleys on the output shaft, don't unusual strike. When fix motor, screws length should not be too long, or will break the parts inside motor. We appreciate highly your cooperation. Any return of faulty items we will cover the return postal cost. Please note, if you don't want the item for any other reason postal charges is yours.
Any return, please send by recorded post only. If you didn't receive the item, please wait for maximum 15 days and kindly inform us within 7 days.