Cycling Reciprocating Motor Linear Actuator DC 12V 24V Gear Box 15/20/87/1000RPM
Specification: DIY Design Reciprocating Cycle Linear Actuator Motor Voltage: DC 12V 24V Stroke: 12mm 16mm 20mm Bracket Made of Aluminum alloy, very sturdy construction inside and outside. The outside shell is well build and has excellent access to mounting screws.
Widely use for Shale shaker, Vibrating screen, Incense machine, Squirt machine, Spraying Machine, Pellet machine, Particle-making Experiment and so on. Feature: --This Linkage Mechanism is an automatic constantly reciprocating linear actuator motor, which frequency is Variable. -This machine output in an axle, the run speed on axis is Non-uniform. -This machine is Non-standard manual production, the surface is rough. -The speed faster, the noise louder.
-Linear motion part is consist of sliding linear ball bearing and steel axle. Axle need adds lubricating oil at regular intervals, in order to limited axle temperature less than 90 degrees, and oil wetness.
-Due to rotating lump is affected by gravity, the machine go and back speed is different. -If you want to control speed, you can add a PWM DC motor speed controller for this. Packing List: 1PcsAluminum Base plate 1PcsAluminum Slider 1PcsAluminum Stroke Slider 1PcsStainless Steel Shaft 2PcsAluminum Connection Sliders 1Set Connection Bearing 1PcsDC Geared Motor 1PcsScrew nut 12PcsScrews 4PcsWashers 1PcsAllen wrench 1PcsScrewdriver 1PcsSpanner. For the long-time holiday, we'll post the info on our store and reply you automatically via emails.
We'll try our best to help you solve the problem.